This model comes packaged in a zip file and includes:

A supported version
An Unsupported Version
the Lychee file (editable supports)
A render
Photographs

The model in the photographs was printed with 60% Epax Hard resin mixed with 40% Siraya Tenacious on an Elegoo Mars 2 Pro using the following settings: 

Layer height: 0.05mm
Bottom Layer Count: 6
Exposure Time: 3 seconds
Bottom Exposure Time: 25 seconds
Light-off Delay: 0 seconds
Bottom Light-off Delay: 0 Seconds
Bottom Lift Distance: 15mm
Lifting Distance: 12mm
Bottom Lift Speed 40mm/min
Lifting Speed: 40mm/min
Retract Speed: 150mm/min