Prusa Research Logo
Prusa Research Logo
Published 2018-04-30T11:41:35+00:00
I created the 3d printable Prusa Research logo to make my Prusa i3 MK3 IKEA Lack enclosure by user Cisardom. look better than it already does. We all know i did not design the logo but i could not find one to print so i made one myself. I hope you guys love the brand as much as i do!
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cbNYI84AcDq
Print at 0,1mm resolution and 15% infill.
The steps i took to get in on the enclosure the wright way!
~Print the logo
~Put some clear see trough tape on the logo and push it till you think all the parts are sticking good. !!! BE CAREFULL WITH THE 5 TINY PIECES !!!
~Try to get it of the bed in one piece. If you have calibrated your printer correctly it would be not that much of a hassle.
~If you got it off the bed in one piece take a tiny bit of loctite or other superglue and try to put a little bit glue on each part. !!! BE CAREFULL NOT TO GET GLUE ON THE TAPE !!!
~Place it where ever you like and enjoy! I used it on the enclosure but i already found a few more cool spots to put them!
Date published | 30/04/2018 |
Time to do | 10 - 20 minutes |
Dimensions | 50x30x2 |
Technology | FDM |
Complexity | Easy |