Frog Flexi
$2.89 Frog Flexi
3D
Published 2024-05-30T00:15:45+00:00
Its a chonky frog kind of day!! This release includes:
🐸 Frog Flexi
🐸 Frog Flexi Split up (body and eyes)
🐸 2 different 3MF files, white belly and spotty
🐸 3MF guide
Tested down to 50%, if you are having adhesion issues I recommend using a brim!
The eyes should audibly click into their place, I do strongly recommend using your glue of choice as well to make sure they stay in place. It might take a little bit of working the eye to get it to click in, if you are having a really hard time getting them in, you can sand off the edges, or reprint them at 0.5-0.1% smaller. In testing when printing a 80% scale frog, it is best to scale the eyes to 78%
The rainbow frogs were printed in polymaker matte rainbow, I printed a full plate to make sure I got a couple color changes at 0.16 Layer height, I believe the plate was about 250 grams or so. The green frogs are glow in the dark Bambu Labs green. the pink and blue frogs were printed in Cookiecad unicorn. The orange frogs were printed in Bambu labs orange gradient.
This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon
https://www.patreon.com/Layersingreen
As always with all designs and especially if you are using the split up version I do not recommend children under 3 handling the prints without supervision.
| Date published | 30/05/2024 |
| Price | $2.89 |
| Technology | FDM |
| Support Free | YES |