Dragon Chess! Dragon Horse (The Knight)
$5.00 Dragon Chess! Dragon Horse (The Knight)
Published 2019-11-18T23:42:23+00:00
Dragon Chess! A comprehensive chess set comprising of 6 original dragon sculpts. Figures propotioned to allow for easy piece recognition and play.
I present the Knight! I guess officially he's a Kirin or a Longma? No idea, I just sculpted him from my mind (scary) and then found out his kind had been around for a few thousand years already.
Scaled to play on a board with 2.5inch (6.35cm) squares. The pieces will scale down to fit smaller boards. The piece is highly detailed and can scale up to larger sizes should you just want to use it as an ornament.
Want to know how to paint the dragons?
https://www.instructables.com/id/Dragon-Chess-Painting-the-Dragons/
Designed to be printed on a resin printer. Has been tested on the Prusa SL1 and the Elegoo Mars.
Due to requests, I am including the following files:
1) The dragon model as a solid. This is suitable for FDM printing and for resin printing, people can make their own decisions regarding hollowing and/or drain hole locations
2) The hollow shape and drain holes as subtractive shapes that I used. These can be used as a point of reference or just some ideas. You would need to subtract these from the solid.
3) The dragon model pre-hollowed with my shape and drain holes. This is suggested only with the model at the current scale and printed with the base flat on the bed and was successful with the Prusa SL1 and the Elegoo Mars. I do not guarantee success with other printer models and scales and you use these at your own risk.
Please do not ask me to hollow models for you etc... I honestly don't have the time and there are plenty of places online where you can ask for help
I have no idea how this would work with an FDM printer. I suspect the rearing pose might prove very problemaic but am happy to be proven wrong
Designed to be printed on a resin printer. Has been tested on the Prusa SL1 and the Elegoo Mars.
The Dragon Horse is the only figure in the Dragon chess set that requires supports but I loved the rearing pose so much, I decided it was worth it. His legs will require supports as will the tip of his tail.
Due to requests, I am including the following files:
1) The dragon model as a solid. This is suitable for FDM printing and for resin printing, people can make their own decisions regarding hollowing and/or drain hole locations
2) The hollow shape and drain holes as subtractive shapes that I used. These can be used as a point of reference or just some ideas. You would need to subtract these from the solid.
3) The dragon model pre-hollowed with my shape and drain holes. This is suggested only with the model at the current scale and printed with the base flat on the bed and was successful with the Prusa SL1 and the Elegoo Mars. I do not guarantee success with other printer models and scales and you use these at your own risk.
Please do not ask me to hollow models for you etc... I honestly don't have the time and there are plenty of places online where you can ask for help
I have no idea how this would work with an FDM printer. I suspect the rearing pose might prove very problemaic but am happy to be proven wrong
Date published | 18/11/2019 |
Price | $5.00 |
Dimensions | 44.34mm x 58.23mm x 106.83mm |
Love the whole set. Mars Pro 2