Cable Storage (3-Size Tower)
Cable Storage (3-Size Tower)
Published 2016-05-24T09:11:21+00:00
This is a funky little cable holder in 3 sizes (40,50,60mm)
Suitable for wires around 3mm thick, useful for tidy storage/travelling.
(Printing in colour is recommended as it'll look sweet!)
--PASS/NO PASS-- PASS, !!print tower part scaled down by 3%!! --support-- support needed see slicer --Files-- Print is 4 STL files. some minos gapps/faults in file (checked with meshmixer) but prints okay --Printing-- 150 micron layer height Printed with 3 perimeters 100% Infill 3 Top/bottom layers --Fillament-- White PLA 215 degrees Heated bed 50 degrees --Prints-- 200 Minutes print job 50 Gram (10 gram support) --Post printing-- remove supports sanding
Date published | 24/05/2016 |
Time to do | 200 - 250 minutes |
Material Quantity | 50 |
Dimensions | 80x80x80 |
Technology | FDM |
I had to scale the tower down so the rings would fit better. It works great! Thank you