SHOT GLASSES HOLDER
SHOT GLASSES HOLDER
3D
Published 2024-05-20T09:01:14+00:00
Shot glass holder for your team.
All parts are seperate.
When assembling the top and bottom, you need to move the top with a little force so that the pins fit into the rack; After you have connected the upper part to the lower part, I do not recommend removing the upper part since the parts fit very tightly to each other and you can break the connectors. The idea was that the upper and lower parts would always be connected and would not be removed. The salt holder screws in and out without any problems.
PLATE 1:
Salt Holder:
- no support
- Layer height - 0.28mm
- Infill density - 15%
Bottom:
- support (normal, snug, threshold angle - 40
- Layer height - 0.28mm
- Infill density - 15%
PLATE 2:
- no support
- Layer height - 0.16mm
- Infill density - 15%
| Date published | 20/05/2024 |