Ossum Plastique 2.5" Drone Frame
3,078
visitas
72
descargas
2
colecciones
2 comentarios
Cargando comentarios... 
Ossum Plastique 2.5" Drone Frame
3D
Published 2020-09-30T07:17:33+00:00
18
2
Add to Collection
Descripción
This frame is designed to be a tough freestyle frame, printed from Nylon. The design requires no supports or infil, so you can balance strength and weight by varying the number of perimeter walls.
My build weighed in at about 51g dry, or 80g with a 550mAh GNB 2S, which is not featherweight but in my opinion provides a very nice flight characteristic.
My own build is as follows:
- NBD BeeBrainBL V1 Flight Controller
- NBD BeeEye Camera with Goober Canopy
- GepRC 1202 8000kV Motors
- Avan Rush 2.5" Props
Since the gorgeous Goober canopy has a fixed camera tilt angle I have added a small TPU riser to increase it. This riser will neccesitate the use of flexible screws, or like me you could just use snippets of nylon filament, heated into "rivets" (see the green in the photos).
Información técnica
| Date published | 30/09/2020 |
| Sin apoyo | YES |
Más información
Archivos