Ford FlatHead V8 (2/14) / Timing Cover (new design) and Distributor
Ford FlatHead V8 (2/14) / Timing Cover (new design) and Distributor
3D
Published 2021-05-17T08:23:26+00:00
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602).
This design is planned to receive a supercharger soon.
The assembly of this part is meticulous; the components are quite fragile, especially the "TimingCoverDistributorTop".
The livewires are provided for 3mm silicon electric wires.
On my pictures, the TimingCover is mounted with screws; if it has to replace the original model it can be fitted with 4mmx2mm disk magnets.
In addition to this package, are also published :
New Sparkplug because the original is too small (in my opinion)
Livewires for this Sparkplug
Release
14/03/2020 :
New files :
. SparkPlugSeparator2.stl
. SparkPlugSeparator3.stl
. SparkPlugSeparator2x2.stl
Print Settings
1 x TimingCover : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20%
1 x TimingCoverDistributor : Layer:0.15mm Raft:no Brim:no Support:no Infill:30%
8 x TimingCoverDistributorLiveWires : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100%
1 x TimingCoverDistributorLiveWiresCover : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x TimingCoverDistributorSensor : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x TimingCoverDistributorSensorPlug : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x TimingCoverDistributorTop : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x TimingCoverGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x TimingCoverJoin : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100%
Accessories
1 x m2x3mm SHCS
1 x m2x10mm SHCS
4 x m2x15mm SHCS
2 x m2 lock washer
6 x m3 threaded insert
5 x m3 lock washer
9 x m3x12mm threaded rod
5 x m3x13mm threaded rod
1 x m3x45mm SHCS
5 x m3x8mm SHCS
1 x m4x5mm set screw
Assembly
Look at pictures.
More add-ons
https://cults3d.com/en/design-collections/dancan13f/ford-flathead-v8-engine-add-ons
| Date published | 17/05/2021 |