Flexi Sloth Print In Place STL and Multicolor 3MF
![Loader](https://static.myminifactory.com/images/ajax-loader.gif?v159)
![](https://static.myminifactory.com/images/profile-default.jpg?v159)
![](https://static.myminifactory.com/images/ajax-loader.gif?v159)
$2.99 Flexi Sloth Print In Place STL and Multicolor 3MF
Published 2024-06-01T07:24:22+00:00
The Adorable Flexi Sloth! Just check out this smiling face, isn't it adorable? 😄 What do you think? Let me know in the comments. And yeah, as usual, I've included pre-painted .3mf files and other versions like keychains and magnets. I hope you enjoy printing this adorable fella!
For optimal results, here are the recommended settings:
No need for supports!
Magnet Size 6x6x3mm
Aim for a layer height between 0.18mm to 0.2mm
Stick to 2 walls
Bottom layers: 4
Top layers: 6
Shoot for a 15% infill (Gyroid or Cross Hatch)
Downscale from 100% to 80%
Precision settings: Slice gap closing radius - 0.006, Resolution - 0.006 (This helps avoid weird artifacts near the eyeball while printing in multicolor)
Date published | 01/06/2024 |
Precio | $2.99 |
Sin apoyo | YES |