MK XIII Micro Quad
Support Free
Featured
Exclusive
55,667
views
5,093
downloads
54
collections
54 comments
Loading comments...
MK XIII Micro Quad
3D
Published 2017-02-27T23:16:04+00:00
776
54
Add to Collection
Description
Meet the MK XIII Micro Quad frame! If you are looking for a brushed FPV frame to race inside and outside this is the frame of your dreams!
I have published these files for FREE download! Please go to my youtube video and hit the like button if you think this is a good frame design.
This frame is the 13th iteration in my micro quad frame design that I started designing after flying the QX90. The QX90 opened my eyes to how much fun a micro sized quad could be. I have put a lot of time into making this frame the best possible solution for anyone looking to build a sub 100mm quadcopter. A lot of crashing helped me determine the weak points in this frame and I did my best to keep weight down while also making this thing as tough as possible.
How to install electronics video can be found here: Micro Quad Electronics
BOM (ORDER THESE PARTS TO MAKE ONE)~~~~~~~~~~~~~~~~~~~~~
Spintech Brushed Motors (8.5X20):
http://amzn.to/2fXujVM
SP Racing F3 Evo Flight Controller:
http://bit.ly/2lsf0q5
Ladybird Props:
http://amzn.to/2dxYNMs
Tiny SBUS 8 CH FGrSky Rx:
http://bit.ly/2l69Svu
Crazy Pony 25mW FPV camera:
http://amzn.to/2m31YSY
FEATURES~~~~~~~~~~~~~~~~~~~~~~
-
Frame with motor mounts Weighs 10.8 grams
-
100mm diagonal X 70mm across motor spacing fits parrot props
-
Stiff enough to keep out nasty oscillations that play tricks on flight controller
-
(UPDATED) FPV camera now has better protection from nasty crashes and has a special slotted mount to securely hold FPV camera in place.
-
Micro Losi connector hard mounted to frame to keep wires out of props
-
(UPDATED) Motor wires are routed through a channel on the underside of each arm. This keep wires from getting damaged or snagged, while also making them easy to remove and instal without having to remove other components.
-
Frame arms support brushed motors from the bottom to prevent the shaft pushing the back plate off
-
(UPDATED) Integrated flight controller standoffs are now bigger and make it easier to mount the flight controller.
-
(Updated) larger diameter antenna passages allow for easy install in arms 1 & 2. Keeps Rx antenna safe and out of the way.
-
Designed to hold 8.5X20 brushed motors
-
Easy to print, requires no supports
Printing Details (MX_XIII FRAME) & (Motor_Mount)~~~~~~~~~~~~~~~~~~~~~~~~
(MX_XIII FRAME)
RECOMMENDED PRINT SETTING FOR FRAME (PLA):
(You can print this frame out of any material you want)
- 0.2mm layer height
- 225C First layer 220C rest of print
- 60C Build plate
- 60mm/s print speed
- 2 Perimeters
- 4 Top layers 3 Bottom layers
- No support
- Cooling fan on after 2nd layer
- Infill 40%
- 0.4mm Nozzle
- 0.48mm bead width
(Motor_Mount)
RECOMMENDED PRINT SETTING FOR MOTOR MOUNTS (NINJAFLEX):
(MUST BE NINJAFLEX)
- 0.2mm layer height
- 225C first layer 220C rest of print
- 12mm/s print speed
- No Support
- 100% infill
- 0.4mm Nozzle
- 0.28mm bead width (This is low because otherwise, the thin walls of the motor mount will not print)
Printing Details
Printing Details (MX_XIII FRAME) & (Motor_Mount)~~~~~~~~~~~~~~~~~~~~~~~~
(MX_XIII FRAME)
RECOMMENDED PRINT SETTING FOR FRAME (PLA):
(You can print this frame out of any material you want)
- 0.2mm layer height
- 225C First layer 220C rest of print
- 60C Build plate
- 60mm/s print speed
- 2 Perimeters
- 4 Top layers 3 Bottom layers
- No support
- Cooling fan on after 2nd layer
- Infill 40%
- 0.4mm Nozzle
- 0.48mm bead width
(Motor_Mount)
RECOMMENDED PRINT SETTING FOR MOTOR MOUNTS (NINJAFLEX):
(MUST BE NINJAFLEX)
- 0.2mm layer height
- 225C first layer 220C rest of print
- 12mm/s print speed
- No Support
- 100% infill
- 0.4mm Nozzle
- 0.28mm bead width (This is low because otherwise, the thin walls of the motor mount will not print)
Technical Information
发表的日期 | 27/02/2017 |
让时间去下载 | 50 - 60 分钟 |
材料数量 | 10.6 |
尺寸大小 | 82X83X11 |
打印工艺 | FDM |
复杂程度 | 非常容易 |
支持自定义 | YES |
More Information
Object Parts
Just need the camera to arrive so I can get it installed. Flies great!