The Little Prince
The Little Prince
Published 2015-01-19T17:41:13+00:00
Figurine model of The Little Prince, inspired by the original watercolour illustation from the French book Le Petit Prince (1943).
'This strange and lovely parable, written as much for adults as for children, and beautifully illustrated by the author, has become a classic of our time. The narrator, an air pilot, tells how, having made a forced landing in the Sahara desert, he meets the Little Prince. The wise and enchanting storeies the prince tells about the planet where he lives with three volcanoes and a haughty flower, about other planets and their rulers, and about his fight with the bad seeds, make him an entrancing, unforgettable charecter.' - Backpage blub from The Little Prince, by Antoine De Saint-Exupery.
The initial concept behind transforming the illustations from 2D to 3D is to create resources to improve the experience of literature for the blind and partially sighted through rendering illustrations and graphics from well-known fiction into tactile objects and reliefs. Stay tuned :)
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
Recommended print settings (as pictured) 0.20mm layer height 10% infill, minimal support. At full scale 18m high the print uses 64g of filament and 6 hours 45 minutes print time. Increase print resolution for clearer print (e.g 0.10mm).
Date published | 19/01/2015 |
Time to do | 360 - 405 minutes |
Material Quantity | 64g |
Dimensions | 180 x 72 x 163 |
Complexity | Easy |
Zortrax 3D print. June 2015 :)